MOUNTED

The standard pedestal table base is an efficient choice for any commercial space. However, we know the importance of variety, accessibility, and customization when it comes to designing an aesthetically engaging layout. We offer alternatives to our traditional pedestal base and height customizations.

Wall Mounted
Wall Mounted arrow
Floor Mounted
Floor Mounted arrow
The Cantilever Family was designed for wall-mounted applications. This minimal style with the strength of steel catches the eye while thoroughly supporting your tabletops. The optional Pin Leg is available for longer tabletops that require additional support, such as 54” or longer.
 
JICAT-15.5×21.5SM

Small Cantilever

Recommended use for tops up to 30″ long.

 

Model Number: JICAT-15.5×21SM

Weight: 10 lbs.

 

Dimensions: 15.5″ H × 21″ L × 19.75″ wall angle

Frame: 2″ square tubing with 1/8″ × 2″ × 19.75″ steel angle for wall and top attachment

 

Frame End Cap: Plastic

Standard Finish: Black textured

JICAT-15.5×33LG

Large Cantilever

Recommended use for tops up to 54″ long. Tops longer than 54″ require a pin leg for additional support.

 

Model Number: JICAT-15.5×33LG 

Weight: 12.5 lbs.


Dimensions: 15.5″ H × 33″ L × 19.75″ wall angle
Frame: 2″ square tubing with 1/8″ × 2″ × 19.75″ steel angle for wall and top attachment

 

Frame End Cap: Plastic

Standard Finish: Black textured

JIPINLEG

Pin Leg

Recommended use with cantilever for tables over 54″ long.

 

Model Number: JIPINLEG 

Overall Height: 28.25″

Weight: 2 lbs.

 

Top Plate: 4″ × 4″ 16-gauge steel welded on a 1.25″ O.D. 16-gauge steel column

 

Glides: Adjustable plastic

Standard Finish: Black textured

The Fixed Family was designed for floor-mounted applications. Available in both dining and bar height, the floor-mounted table base will keep your tables static and stable while fitting into your design style.

 

Please refer to our handy sizing guide for further assistance. We recommend at minimum one fixed base per 36” × 42” top to avoid too much torque on the floor bolts. Additional bases can be added to support longer tops based on one base per 42″ in length. 

 

JI Bases does not supply floor-attaching hardware or give hardware recommendations. These decisions need to be made by the installer based on the type and condition of the floor.

JIP3-7RDTP12SQDN

Dining Height Fixed

The top plate, base plate, and column are welded as one piece. Floor anchors are not included.

 

 Model Number: JIP3-7RDTP12SQDN

Overall Height: 28.5″

Weight: 10 lbs.

 

Base Plate: 7.5″ diameter 16-gauge metal cover over 5/16″ thick steel plate

Top Plate: 12″ × 12″ square stamped steel welded on 3″ 16-gauge diameter column

 

Standard Finish: Black textured

JIP3-7RDTP12SQBH

Bar Height Fixed

The top plate, base plate, and column are welded as one piece. Floor anchors are not included.

 

Model Number: JIP3-7RDTP12SQBH

Overall Height: 40.5″

Weight: 12 lbs.

 

Base Plate: 7.5″ diameter 16-gauge metal cover over 5/16″ thick steel plate

Top Plate: 12″ × 12″ square stamped steel welded on 3″ 16-gauge diameter column

 

Standard Finish: Black textured

Wall Mounted

The Cantilever Family was designed for wall-mounted applications. This minimal style with the strength of steel catches the eye while thoroughly supporting your tabletops. The optional Pin Leg is available for longer tabletops that require additional support, such as 54” or longer.
 
JICAT-15.5×21.5SM

Small Cantilever

Recommended use for tops up to 30″ long.

 

Model Number: JICAT-15.5×21SM

Weight: 10 lbs.

 

Dimensions: 15.5″ H × 21″ L × 19.75″ wall angle

Frame: 2″ square tubing with 1/8″ × 2″ × 19.75″ steel angle for wall and top attachment

 

Frame End Cap: Plastic

Standard Finish: Black textured

JICAT-15.5×33LG

Large Cantilever

Recommended use for tops up to 54″ long. Tops longer than 54″ require a pin leg for additional support.

 

Model Number: JICAT-15.5×33LG 

Weight: 12.5 lbs.


Dimensions: 15.5″ H × 33″ L × 19.75″ wall angle
Frame: 2″ square tubing with 1/8″ × 2″ × 19.75″ steel angle for wall and top attachment

 

Frame End Cap: Plastic

Standard Finish: Black textured

JIPINLEG

Pin Leg

Recommended use with cantilever for tables over 54″ long.

 

Model Number: JIPINLEG 

Overall Height: 28.25″

Weight: 2 lbs.

 

Top Plate: 4″ × 4″ 16-gauge steel welded on a 1.25″ O.D. 16-gauge steel column

 

Glides: Adjustable plastic

Standard Finish: Black textured

Floor Mounted

The Fixed Family was designed for floor-mounted applications. Available in both dining and bar height, the floor-mounted table base will keep your tables static and stable while fitting into your design style.

 

Please refer to our handy sizing guide for further assistance. We recommend at minimum one fixed base per 36” × 42” top to avoid too much torque on the floor bolts. Additional bases can be added to support longer tops based on one base per 42″ in length. 

 

JI Bases does not supply floor-attaching hardware or give hardware recommendations. These decisions need to be made by the installer based on the type and condition of the floor.

JIP3-7RDTP12SQDN

Dining Height Fixed

The top plate, base plate, and column are welded as one piece. Floor anchors are not included.

 

 Model Number: JIP3-7RDTP12SQDN

Overall Height: 28.5″

Weight: 10 lbs.

 

Base Plate: 7.5″ diameter 16-gauge metal cover over 5/16″ thick steel plate

Top Plate: 12″ × 12″ square stamped steel welded on 3″ 16-gauge diameter column

 

Standard Finish: Black textured

JIP3-7RDTP12SQBH

Bar Height Fixed

The top plate, base plate, and column are welded as one piece. Floor anchors are not included.

 

Model Number: JIP3-7RDTP12SQBH

Overall Height: 40.5″

Weight: 12 lbs.

 

Base Plate: 7.5″ diameter 16-gauge metal cover over 5/16″ thick steel plate

Top Plate: 12″ × 12″ square stamped steel welded on 3″ 16-gauge diameter column

 

Standard Finish: Black textured

Mounted Size Guides

Ready To Place An Order?

CONTACT US

Call 888.792.2275 For More Details

© 2024 Jacobs International